What should I Pay Attention to when using EVA Foam Double-Sided Tape?

As a PE EVA Foam Tape Manufacturer, share with you.

Foam double-sided adhesive refers to applying strong acrylic adhesive on both sides of foam base material. A type of double-sided tape made by covering one side with a release paper or a release film; if both sides are covered with a release paper or a release film, it is called a sandwich double-sided tape. The sandwich double-sided tape is mainly for convenience Double-sided tape.

PE EVA Foam Tape

Foam double-sided adhesive has the characteristics of strong adhesion, good retention, good water resistance, high temperature resistance, and strong UV resistance. The foam base material is divided into: EVA foam, PE foam, PU foam, acrylic foam and high foam. The glue system is divided into oil glue, hot melt, rubber and acrylic glue.

EVA foam double-sided adhesive mentioned this I believe everyone is familiar with, do you know its use and what should you pay attention to when using it? According to the adhesiveness, it can be divided into solvent-based adhesive tape (oily double-sided adhesive tape), emulsion-type adhesive tape (water-based EVA double-sided adhesive products), and hot-melt adhesive tape. Generally used in leather, nameplates, stationery, electronics, automotive trim fixings, footwear, papermaking, handicraft paste positioning. Hot melt double-sided adhesive is mainly used in stickers, stationery, office and so on. There are many types of EVA foam double-sided adhesive products: mesh EVA double-sided adhesive products, reinforced EVA double-sided adhesive products, high-temperature EVA double-sided adhesive products, non-woven EVA double-sided adhesive products, non-residual EVA double-sided adhesive products Products, cotton EVA double-sided tape products, glass EVA double-sided tape products, PET double-sided tape, EVA foam double-sided tape products, etc., are used in the production process of various industries. Sometimes EVA foam double-sided tape products fail. Obviously, the newly purchased double-sided tape has no stickiness at all. In this case, it is not your double-sided tape that has failed, but EVA foam double-sided tape. The use environment of the face rubber products makes it unusable. Here we have made some conclusions for you. The following situations will cause the double-sided tape to lose its effect. Here we remind you to pay more attention:

1. The surrounding environment is too low, which causes the activity of EVA foam double-sided adhesive products to decrease, and it cannot stick to other objects. The ideal temperature when pasting is 15-38 ° C, not lower than 10 ° C.

2. The stage standard for double-sided tape adhesion is too smooth, which makes EVA double-sided adhesive products unable to stick.

Third, there are debris, particles, etc. on the surface of the object, which also makes it unable to stick.

4. When sticking EVA double-sided adhesive products, there are bubbles stuck in it. To this end, we should first adhere at one end and then slowly press to the other end to reduce the probability of air bubbles.

Our company also sells PE EVA Foam Tape, welcome to consult.